1) What is an ideal value of attenuation for the frequencies in pass band especially for a cascade configuration?
a. Zero
b. Unity
c. Infinity
d. Unpredictable
Answer
Explanation
|
ANSWER: Zero
Explanation: No explanation is available for this question!
|
|
2) It is possible to overcome the drawback of m-derived filter by connecting number of sections in addition to prototype & m-derived sections with terminating __________
a. One-fourth sections
b. Half sections
c. Square of three-fourth sections
d. Full sections
Answer
Explanation
|
ANSWER: Half sections
Explanation: No explanation is available for this question!
|
|
3) Which value of 'm' is selected in a composite filter, while connecting the terminating sections in order to acquire proper impedance matching and constant characteristic impedance throughout the passband?
a. 0.3
b. 0.6
c. 0.9
d. 0.12
Answer
Explanation
|
ANSWER: 0.6
Explanation: No explanation is available for this question!
|
|
4) In band elimination filter, the frequency of resonance of individual arms is geometric _________
a. Mean of two cut-off frequencies
b. Difference of two cut-off frequencies
c. Product of two cut-off frequencies
d. Division of two cut-off frequencies
Answer
Explanation
|
ANSWER: Mean of two cut-off frequencies
Explanation: No explanation is available for this question!
|
|
5) For the design of prototype high pass filter T section, what would be the value of inductor if design impedance and cut-off frequency are 600 ohm and 1500 Hz respectively?
a. 19.89 mH
b. 31.83 mH
c. 40.13 mH
d. 51.83 mH
Answer
Explanation
|
ANSWER: 31.83 mH
Explanation: No explanation is available for this question!
|
|
6) What do the high pass filters generally comprise of?
A. Capacitive series arm B. Capacitive shunt arm C. Inductive series arm D. Inductive shunt arm
a. A & D
b. A & C
c. B & C
d. B & D
Answer
Explanation
|
ANSWER: A & D
Explanation: No explanation is available for this question!
|
|
7) Referring to the characteristics of π-section low pass filter given below, what would be the phase shift at 2kHz in the pass band?
a. 0.7731 radian
b. 1.0471 radian
c. 2.551 radian
d. 3.991 radian
Answer
Explanation
|
ANSWER: 1.0471 radian
Explanation: No explanation is available for this question!
|
|
8) For a constant k type LPF with T- section, with the cut-off frequency of about 4kHz, what will be the value of stop-band attenuation at 8 kHz?
a. 10.03 dB
b. 22.87 dB
c. 35.04 dB
d. 50.02 dB
Answer
Explanation
|
ANSWER: 22.87 dB
Explanation: No explanation is available for this question!
|
|
9) While designing a constant-k low pass filter (T-section) shown below, what would be the value of capacitor if L/2 = 20mH, R0 = 500 Ω and fc = 5 kHz?
a. 0.0635 μF
b. 0.10 μF
c. 0.1273 μF
d. 0.20 μF
Answer
Explanation
|
ANSWER: 0.1273 μF
Explanation: No explanation is available for this question!
|
|
10) Which type of filter is shown below?
a. Low pass filter
b. High pass filter
c. Band pass filter
d. Band elimination filter
Answer
Explanation
|
ANSWER: Band elimination filter
Explanation: No explanation is available for this question!
|
|