1) The maximum and minimum magnitude of resultant forces is 1000 N and 500 N at point. What are the values of two forces acting on it?
a. 500 N, 500 N
b. 450 N, 550 N
c. 300 N, 700 N
d. 250 N, 750 N

2) What is the angle made by force A with X and Y ? (where X and Y are components of force A)
a. 75.52^{o}
b. 60.65^{o}
c. 14.03^{o}
d. 14.47^{o}

3) The method of splitting a single force into two perpendicular components along xaxis and yaxis is called as _____
a. orthogonal resolution
b. perpendicular resolution
c. both a. and b.
d. none of the above

4) Which of the following statements is false about forces/couple?
a. Moment of couple is free vector
b. Resultant and equilibrant are equal in magnitude and direction
c. Resultant of a couple is always zero
d. Parallelogram law is to be proved experimentally
Answer
Explanation
Related Ques

ANSWER: Resultant and equilibrant are equal in magnitude and direction
Explanation: No explanation is available for this question!


5) What is the reaction acting on point Q, for the simply supported beam shown below?
a. 5 N (↑)
b. 10 N (↑)
c. 10 N (↓)
d. 40 N (↓)

6) What is the centroidal distance of an equilateral triangle of side 2 m?
a. 0.866 m
b. 0.769 m
c. 1.000 m
d. 0.577 m

7) What is the distance of centroid with respect to diagonal shown in diagram below?
a. a /√3
b. a /√2
c. a /√18
d. 3a /√2

8) Which method is used to determine centroid of a composite figure?
a. Analytical method
b. Graphical method
c. Both a. and b.
d. None of the above

9) When acceleration is _______, velocity of a particle is constant.
a. constant but non zero
b. maximum
c. zero
d. none of the above

10) A bus travels with a speed of 15 m/s when accelerated at 0.10 m/s^{2} from its rest position. What is the distance traveled?
a. 1125 m
b. 1000 m
c. 2250 m
d. None of the above

11) A ball dropped from a wall of height h travels a distance of 50 m in last two seconds before landing. What is the height of the wall from which the ball was dropped?
a. 120.15 m
b. 127.37 m
c. 183.48 m
d. Insufficient data

12) What is the distance traveled by an electron in first 4 seconds from its initial position, if velocity time relation is given as v = 3t?
a. 12 m
b. 15 m
c. 20 m
d. 24 m

13) What is the average resistance required to stop a truck of mass 600 kg in a distance of 30 m, if initial speed is 30 m/sec?
a. 8000 N
b. 9 kN
c. 9.5 kN
d. 9 N

14) A block sliding down an inclined plane has acceleration _________ acceleration due to gravity.
a. less than
b. greater than
c. same as
d. none of the above

15) Force of 150 N moves a body in 5 sec along a straight line according to x = t^{3}  60t. What is the mass of the moving body?
a. 17.23 kg
b. 15.23 kg
c. 15 kg
d. 5 kg

16) If an elevator travels at constant velocity, the normal reaction R is given as ______
a. m (g +a)
b. m (g  a)
c. mg
d. ma

17) If a particle moves along a curved path, then what will be the normal component of velocity acting on the particle, if magnitude of tangential component of velocity is 30 m/s at an angle of 50^{o} with the vertical?
a. 57.8 m/s
b. 68.9 m/s
c. 40.2 m/s
d. None of the above

18) What is the position of a particle A, if it moves along a path y = 2x^{3} / 3 with uniform velocity of 15 m/s? ( Assume v_{x} = v_{y})
a. (0.33, 0.5)
b. (0.235, 0.707)
c. (0.577, 20.33)
d. (0.707, 0.235)

19) The radius of curvature of trajectory for a profile is minimum, if __________
a. velocity is minimum
b. acceleration is maximum
c. both a. and b.
d. none of the above

20) The radial component of velocity for a particle moving in circular path is ______
a. constant
b. radius itself
c. variable
d. zero

21) A ball is thrown on an inclined surface PQ with a velocity of 50 m/s. What is the range on the plane if the ball is thrown in upward direction? ( θ = 20^{o}, α = 35^{o})
a. 159.32 m
b. 200.12 m
c. 218.89 m
d. 221.31 m

22) A stone undergoes projectile motion when thrown from top of the building. If it strikes the ground surface at a distance away from the building then its horizontal direction is __________
a. less than range
b. more than range
c. same as range
d. unpredictable

23) What is the minimum velocity attained by a ball thrown with velocity of 20 m/s at an angle of 40^{o} with the horizontal?
a. 15.32 m/s
b. 12.85 m/s
c. 16.78 m/s
d. None of the above

24) What is the momentum of a body of 2 kg at its highest point, when thrown with a velocity of 15 m/s at an angle of of 70^{o} with the horizontal?
a. 9.23 kg ms^{1}
b. 10.26 kg ms^{1}
c. 28.19 kg ms^{1}
d. None of the above

25) A block is displaced by 3 m when a force of 200 N is applied on it on an inclined surface which is at an angle of 50^{o} with the horizontal. What is the work done?
a. 385.67 Nm
b. 459.62 Nm
c. 933.00 Nm
d. Insufficient data

26) If a particle of mass 5 kg moves uniformly along a circle of radius 10 m at 10 m/s, then what is the work done by centripetal force during its one revolution?
a. 0.5 kNm
b. zero
c. infinity
d. none of the above

27) Work done by an engine in 6 sec is 1000 joules. What is the power generated by the engine in watt?
a. 1600 watt
b. 600 watt
c. 166 watt
d. 600 watt

28) According to the principle of conservation of energy, under the action of _________ force, the sum of P.E and K.E of a particle remains constant.
a. conservative force
b. dissipative force
c. frictional force
d. air resistance force

29) The total momentum of a system __________, if no external impressed force acts on it.
a. increases
b. decreases
c. remains constant
d. none of the above

30) If two objects of 30 kg and 10 kg move with equal kinetic energy, then what is the ratio of magnitudes for linear momentum?
a. √3 : 1
b. 1 : √3
c. 1 : 3√3
d. 1 : 3

31) An object of 30 kg is moved with a velocity of 2 m/s on a horizontal smooth surface. What is the velocity of the block for 4 seconds if force of 40 N is applied on it in the direction of force?
a. 2 m/s
b. 4.6 m/s
c. 7.33 m/s
d. 9.33 m/s

32) If a body is subjected to plastic impact, _______
a. only kinetic energy is conserved
b. only momentum is conserved
c. both a. and b.
d. none of the above

33) Which axial force is determined while analyzing a truss?
a. compressive force
b. tensile force
c. both a. and b.
d. none of the above
